The Glareshield

This is the Glareshield with the MCP and EFIS Backlit.

Supplier = www.Symulatory.com

Symulatory Part Numbers

• 737NG_GLAR_BAS
• 737NG_SET_GLAR_L
• 737NG_SET_GLAR_R

Related Pages

• EFIS
• MCP

Comments

The quality exceeded all my expectations and each individual component was wrapped seperatly with obvious care. I recommend you unpack it with simialr care.I am very pleased with this hardware, although I had some minor issues fitting the Opencockpits MCP and EFIS into it. Although it is a full size MCP and a full size Glaresheild the PCBs in the MCP are just about 25mm too wide. I put spacers in the central frame but this is not the final solution because the MIP when it arrives will not mate with the Glareshield if I leave the spacers in. I will keep you updated.

No documentation or build instructions come with this, it is a big jigsaw. Luckily I photographed every step of the build and will publish here shortly. In the meantime here are some pics.

		Left - Glareshield complete. Note padded Leatherette top See below. I sourced this high quality Vinyl Letherette from Germany for a mere 20 Euros It really makes the difference.